COMMON ISSUES:
OPENING AIRPODS PRO REPLICAS
You may receive miss-marketed AirPod Pro clones when ordering on sites like AliExpress from unverified sellers. You can use the app for the chipset to verify that you received the correct chipset, it is often not enough proof to show the app. You may need to open the AirPods and take a picture of the chipset as proof.
Here’s how you can do this, without damaging the AirPods:
https://airreps.link/approtrdwn
MACOS INCOMPATIBILITY WITH AIRPODS PRO REPLICAS
One common issue with AirPods Pro replicas is their compatibility with macOS. This issue is caused by the replicas’ inability to fully support iCloud, resulting in iCloud verification failure. The issue can be fixed by first forgetting the AirPods on any iCloud device (iOS, iPadOS, WatchOS, etc) you have connected to before.
AUDIO/VIDEO PAUSING FREQUENTLY WITH AIRPODS PRO REPLICAS
Frequent pausing of audio or video while using AirPods Pro replicas is a common issue, often caused by the in-ear detection sensors. This issue can also occur if the AirPods do not fit securely in your ear. To fix this issue, you can either choose other ear tips (on pros) or turn off in-ear detection through settings.
AIRPODS PRO REPLICAS REMAIN CONNECTED AFTER CLOSING THE CHARGING CASE
Some users of AirPods Pro replicas may experience an issue where the AirPods remain connected to their device even after closing the charging case. This is typically caused by a malfunction with the magnets and hall sensor inside the case, which are responsible for detecting the position of the AirPods. To fix this issue, follow the steps outlined in the following YouTube tutorial: https://youtu.be/kv5Ixw_YY2E
BAD SOUND QUALITY OR BASS ISSUES WITH AIRPODS PRO REPLICAS ON iOS Some users of AirPods Pro replicas may experience issues with the sound quality or bass on iOS devices. This is typically caused by the “Headphone Accommodations” feature, which is enabled by default on iOS. To fix this issue, you will need to turn this off. Follow these steps: Go to Settings > Accessibility > Audio / Visual > Headphone Accomodations and turn it off.
RESETTING PAIRING ON AIRPODS PRO REPLICAS
If you are experiencing issues with only one of your AirPods Pro replicas working properly, and the pod is slowly flashing every time you open the charging case, you can try resetting the pairing. This is a simple process that can help resolve the issue.
To reset the pairing on your AirPods Pro replicas, follow these steps:
• Hold the back pairing button for 2-3 seconds while the pods are in the case.
SOFT RESET FOR AIRPODS PRO REPLICAS
• Forget your device from Bluetooth settings, then turn off Bluetooth.
• Open the lid and hold the back button for a few seconds, until the light flashes, then close the lid. Don’t worry if your light doesn’t flash the same as in the image.
• Wait a full 1 minute, then turn on Bluetooth, open the lid and try to reconnect.
• If it doesn’t work, take the pods out and put them back in. Close the lid and wait for the light to turn off. Then open it and try again. It can take 3-4 SOFT RESETS to work. If it doesn’t try a HARD RESET (see below)
Click on the link to view an image of how to soft reset https://airreps.info/softreset
HARD RESET
• Forget your AirPod device from Bluetooth settings.
• Remove the pods from the case for several hours to let the battery fully drain. Leave the case open. It’s important to not have any residual charge left, so leave it out for at least one full day or more if required.
• Once it’s drained, put the pods back in the case and charge the case.
• Now, do a SOFT RESET. It can take 3-4 SOFT RESETS to work
L/R IMBALANCE FIX (The Easy Way)
To adjust the left/right volume balance on an iOS device, go to Settings > Accessibility. On an Android device, follow these steps:
- Open the Settings app and select Accessibility from the list.
- On the Accessibility screen, scroll down to the Audio and On-Screen Text section.
- Use the slider to adjust the volume balance until the audio sounds calibrated.
For advanced users with basic soldering experience, there is a more involved method for fixing left/right volume imbalance in AirPods. If one of your AirPods sounds quieter or has less bass than the other, it may be out of phase. This can occur when the earbuds are improperly wired during assembly. To fix this issue, you can follow the instructions in this community-written guide: https://airreps.info/outofphase. You can also use the test provided on the website to determine if your AirPods are out of phase.
CAN’T CONNECT TO MACOS:
To troubleshoot connectivity issues with AirPods, try the following steps:
Forget the AirPods from your iPhone (This seems to be an issue with iCloud Connect). Try connecting the AirPods to your Mac. If you don’t hear any sound when the AirPods are connected, you may need to reset them.
Audio doesn’t play while Apple Watch is connected “WatchOS 7+ Issue”
THIS ISSUE HAS BEEN FIXED ON THE LATEST FIRMWARE/VERSION OF THE CLONES, UPDATE YOUR V3M/V4.5 IF YOU’RE EXPERIENCING THIS
If you’re using WatchOS and experiencing issues with your AirPods clones, such as connection problems or freezing on your phone, there are two ways to fix this. Credit goes to SykadeLick#4034 on Discord for identifying the issue.
- Method that works for all types:
- Power off your Apple Watch or put it in airplane mode.
- Your AirPods should now function correctly.
- Method that only works for AirPods Pro clones:
- With your AirPods Pro in your ears, go to Settings > Bluetooth on your iOS device.
- Tap the info button next to your AirPods in the list of devices.
- Tap Ear Tip Fit Test.
- Tap Continue, then tap the Play button.
- Your AirPods Pro should now function correctly.
